Keri Systems NXT-4D 4-Door 8-ReaderController

Keri Systems NXT-4D Four Door/Eight Reader Controller is built for today’s IT environments.With all Ethernet functionality built directly into the controller, Keri’s proprietary MAC address is allowing for reliable hardware discovery and true 1 button autoconfiguration. By using an existing TCP/IP network, controller cabling costs may be eliminated, or by using inexpensive unshielded CAT5 cable if building a new network they may be reduced up to 50% over traditional hard-wired access systems. The NXT-4D is designed to be extremely intelligent with little reliance on network traffic for decision making allowing it to be extremely thrifty by any network’s valuable bandwidth.CLICK HERE FOR Keri-NXT-4D-specifications.pdfFeatures4 Door/8 Reader Controller for Keri’s Doors NXT product lineOn-board TCP/IP – no network adapters requiredReduces controller cabling cost up to 50% over RS-485, Current Loop or other traditional networking schemes by allowing unshielded CAT5 cableUtilize existing LAN/WAN/Ethernet or pull your own dedicated CAT-5 NetworkEmbedded MAC Address for One button AutoConfigurationBuilt-In Tamper InputStandard 4 PIN Block and RJ Jack built-in for network connectionRe-assignable Inputs and OutputsFlash Memory for easy firmware upgradesUp to 64 Controllers (256 doors) and 1024 auxiliary I/O points per controller network50,000 Cardholders, 10,000 Selectable Event Buffer per controllerLocking Metal Enclosure (optional without)96 Bit Encryption