Keri Systems NXT-2D 2-Door 4-Reader Controller

Keri Systems NXT-2DTwo Door/Four Reader Controller is built for today’s IT environments. With all Ethernet functionality built directly into the controller, Keri’s proprietary MAC address is allowing for reliable hardware discovery and true 1 button autoconfiguration. By using an existing TCP/IP network, controller cabling costs may be eliminated, or by using inexpensive unshielded CAT5 cable if building a new network they may be reduced up to 50% over traditional hard-wired access systems. The NXT-2D is designed to be extremely intelligent with little reliance on network traffic for decision making allows it to be extremely thrifty with any network’s valuable bandwidth. Features 2 Door/4 Reader Controller for Keri’s Doors NXT product line On-board TCP/IP – no network adapters required. Reduces controller cabling cost up to 50% over RS-485, Current Loop or other traditional networking schemes by allowing unshielded CAT5 cable. Utilize existing LAN/WAN/Ethernet or pull your own dedicated CAT-5 Network Embedded MAC Address for one button Auto-Configuration Standard 4 PIN Block and RJ Jack built-in for network connection. Re-assignable Inputs and Outputs Flash Memory for easy firmware upgrades Quick Disconnect Connectors Flash Memory for easy firmware upgrades. Up to 64 Controllers (256 doors) and 1024 auxiliary I/O points per controller network 50,000 Cardholders, 10,000 Selectable Event Buffer per controller. Built-In Tamper InputLocking Metal Enclosure (optional without)